-
Grate Magnets
Bunting® Grate Magnets / Hopper Magnets provide a properly configured, high-density magnetic field to trap and hold ferrous fines, fragments, and small metal objects as product flows through them. Stainless steel tubing and frames are welded into strong, integral units. They can be installed – or simply laid – inside hoppers, housings, and bins – and easily removed for cleaning. Grates are built for low-abrasion applications and should measure at least twice the size of your outlet opening, so as not to restrict product flow.
-
Plate Magnets
Bunting® Plate Magnets install easily in enclosed flow lines to remove ferrous fines, as well as large pieces of tramp iron, from many types of free-flowing and pneumatically conveyed material. They can handle powdery, moist, lumpy, and abrasive products and large debris that might choke, bridge, or cause rapid wear in cartridge-based separators. Plate Magnets can also be installed above conveyors or below conveyor drive pulleys to capture contaminants as material drops from open belts.
GROUND SHIPPING ONLY.
This item cannot be shipped via UPS Air.
For applications that involve very fine ferrous particles, we suggest using a Rare Earth Plate Magnet.
-
Torpedo In-line Magnets
Torpedo in-line magnets benefit plastics manufacturers by removing tramp metal from product flow before the product reaches equipment such as plastic molding machines. This protects other equipment in your facility from the devastating damage that metal contamination in plastic can cause.
Torpedo in-line magnets attract and hold ferrous tramp metal contamination using powerful neodymium rare earth magnets. They are easy to install and clamp directly into flexible hoses to capture ferrous tramp metal from bins, hoppers, and gaylords. The unwanted metal is pulled from the product line without the material flow being impeded. Torpedo In-Line Magnets feature space-saving design making them a perfect choice where overhead space is limited. Bunting Torpedo in-line magnets have a holding force of 6.1lbs.
Cleaning torpedo in-line magnets is fast and easy. Simply disconnect the quick-release tri-clamp fitting to separate one half from the other and wipe the tramp metal down the cartridge and off the end. The precision designed housing is designed for leak-free operation, easy cleaning, and frequent inspection.
Torpedo Magnets are available in the following standard sizes:
• TIM-15 – for use with 1.5 Inch Tubing
• TIM-20 – for use with 2 Inch Tubing
• TIM-25 – for use with 2.5 Inch Tubing
• TIM-30 – for use with 3 Inch Tubing
• TIM-40 – for use with 4 Inch Tubing
-
Tube Magnets
Tube magnets are a powerful and simple magnetic separation solution. Available in ceramic, high-intensity neodymium, and power-balanced neodymium, tube magnets may also be described as “magnetic rods” or “magnetic cartridges.”
Tube magnets allow you to enjoy versatile installation options and superior magnetic separation performance. Their powerful magnetic fields excel at attracting and holding multiple sizes of ferrous metal contamination, from very fine and small particles to larger pieces of tramp metal and debris. The magnetic strength of our tube magnets also prevents wipe-off, meaning you do not have to worry about contamination re-entering your product flow.
Our standard tube magnets are 1” in diameter and available in lengths from 4” to 24”. To boost durability, end plugs are fully welded into the tough 1” diameter tubing.
When installing tube magnets, the cartridge center-to-center distance between trays should not exceed 2”.
Bunting Tube Magnets are tapped on both ends with a 1/4"-20UNC thread.
Magnetic Separation Equipment
Bunting® is the industry leader in magnetic separation equipment. Literally hundreds of thousands of our products are used in a variety of industries and manufacturing processes to protect your customer, equipment and brand from damaging tramp metal. Now, a select offering of our magnetic separation equipment is available at BuyMagnets.com.
Our separation technology is available in a variety of designs and options to fit any application. No matter where you use them, the result is the same: pure product, intact processing equipment and a solid reputation. A selection of in-stock Grate (Hopper) Magnets, Drawer Magnets, Plate Magnets and Magnetic Pulleys to catch ferrous materials are available online for immediate shipment. If you can’t find what you are looking for, need a custom size or a specific problem, e-mail our team at Bunting or Contact us for custom magnetic separators and custom magnetic separation applications.