Magnetic Hand Tools, Holding Magnet
|Part #||Holding Power (lbs)||A||B||C||Hole Dia.||Price||Quantity|
Constructed of a magnet embedded in a steel channel,
or a magnet sandwiched between two steel plates,
these magnets provide strong pull for their sizes. Most
come with mounting holes.
Holding power is tested on a flat, machined steel plate,
1/2” thick. If the surface to which the magnet is to be
attached is rough, rusty or painted, the holding force
may be reduced. For critical applications, build in a
safety factor of two or three.
- All Measurements are in inches (unless otherwise noted)
- Direction of Magnetization (DOM) is through the thickness unless noted
- Unless otherwise specified, magnets will be furnished in magnetized condition
- Holding forces are approximate. These are average values obtained under laboratory conditions. Size, shape, and material of the test piece may affect actual pull forces