Magnetic Hand Tools, Holding Magnet
 |  |
| Part # | Holding Power (lbs) | A | B | C | Hole Dia. | Specs | Price | Quantity | |
| MO-80E | 6 | .937 | 2.00 | .312 | .160 | Download | $0.91 | Add | |
| MO-70V | 7 | .875 | 1.00 | .250 | .125 | Download | $0.72 | Add | |
| MO-70SV | 8 | .812 | 1.00 | .312 | .187 | Download | $0.37 | Add | |
| MO-81 | 45 | 1.00 | 2.00 | .625 | .187 | Download | $3.94 | Add |
| Part # | 1+ | 50+ | 101+ | 251+ | 501+ | 1001+ | Qty. | |
| MO-80E | $0.91 | $0.87 | $0.84 | $0.81 | $0.77 | $0.74 | Add | |
| MO-70V | $0.72 | $0.69 | $0.66 | $0.64 | $0.61 | $0.59 | Add | |
| MO-70SV | $0.37 | $0.36 | $0.34 | $0.33 | $0.31 | $0.30 | Add | |
| MO-81 | $3.94 | $3.78 | $3.63 | $3.49 | $3.35 | $3.21 | Add |
Constructed of a magnet embedded in a steel channel,
or a magnet sandwiched between two steel plates,
these magnets provide strong pull for their sizes. Most
come with mounting holes.
Holding power is tested on a flat, machined steel plate,
1/2” thick. If the surface to which the magnet is to be
attached is rough, rusty or painted, the holding force
may be reduced. For critical applications, build in a
safety factor of two or three.
- All Measurements are in inches (unless otherwise noted)
- Direction of Magnetization (DOM) is through the thickness unless noted
- Unless otherwise specified, magnets will be furnished in magnetized condition
- Holding forces are approximate. These are average values obtained under laboratory conditions. Size, shape, and material of the test piece may affect actual pull forces
