Use Coupon Code ‘NEW10’ for 10% OFF YOUR ORDER!
Hand-Controlled Permanent Magnetic Lifters
Bunting® MagLift Permanent Magnetic Lifters are powered by blocks of high-energy neodymium magnetic material. Switching the magnet on/off is achieved by making one of these blocks reversible. In the “on” position, the reversible block is in parallel with the static blocks so that a concentrated magnetic field is produced at the pole feet for lifting. In the “off” position, the reversible block is rotated through 180 degrees to provide a total magnetic short circuit within the lifter body. These lifters are great for lifting flat or round stock! Permanent magnets and manual switching means no operating costs. No more struggles to attach heavy or awkward loads. No more worries about the stability of the load once it’s lifted.
- All Measurements are in inches (unless otherwise noted)
- Direction of Magnetization (DOM) is through the thickness unless noted
- Unless otherwise specified, magnets will be furnished in magnetized condition
- Holding forces are approximate. These are average values obtained under laboratory conditions. Size, shape, and material of the test piece may affect actual pull forces